How To Unwind Blocked Drain
A blocked drain can be an annoyance, but it can also turn into a health problem. Blocked drains can cause bad odor, foul water, and flooding, to name a few of the most notable health problems that can arise from a blocked drain.
Blocked drains can cause a variety of issues, and should be dealt with immediately and properly. By doing so, you can avoid a water bill that keeps climbing and expensive repair bills from coming, as well as the potential health problems that can be caused by blocking drains.
When you have blocked drains
When you have blocked drains in your basement or kitchen, it is essential to take care of the problem immediately. There could be mold growth in your basement that can be dangerous to your health. If you notice a high water bill, it just means that your drains are blocked and must be dealt with immediately. There are a variety of things that can cause the drains to get blocked. You may need to use a snake to unblock the drains, if you have any water coming out of the drains. If you notice a water leak, you can do the unblocking by finding the main shutoff valve. You can turn off the water from the kitchen or basement shutoffs. If you cannot find the main shutoff valve for the water, you can turn off the water supply for the entire home.
Once the water is turned off, you will need to locate the main shutoff valve for the drains, so you can manually start the unwinding of the drains. Once it is unwound, you can manually undo the shutoff, so you can get the water running again. Once the water is running again, you need to drain the water from the kitchen and basement, and put new towels and toys in the areas that were saturated with dirty water.
There are a variety of ways to manually unwind your blocked drains
There are a variety of ways to manually unwind your blocked drains. You can take note of the common signs to identify what you have, and then take care of the blocked drains at home. Once you have identified the blocked drain, find the main shutoff valve, put the water back on, drain the water from the water meter, and manually unwind the drains. By doing so, you will get the water flowing again and get rid of the potential mold growth. You may even want to get a professional to manually unwind your drains. If you have blocked drains on the washing machine, it could be time to replace your washer. You need to check the rubber washer, and make sure that it is still in good condition. Once the rubber is intact, you can manually unwind the drains.
You might ask yourself, what does manual unwinding the drains entail? Manual unwinding means that you have the power to manually undo the drain pipes, and get your water flowing again. Unwinding your drains will reduce the chances of blockages, and prevent your sink pipes from bursting from overloading.